How to Setup the Dreambox Control Center The Dreambox Control Center (DCC) is a freeware application created by an independent software developer named BernyR. It can be used to control and manage a Dreambox DVB satellite receiver via your computer. The application allows you to create playlists, download recordings to the computer and backup other types of data from your Dreambox receiver to your computer. The process of setting up the Dreambox Control Center is fairly straightforward Instructions Plug the USB cable connector into the USB port on the back of the Dreambox receiver, then plug the other end of the cable into an available USB port on your computer. 2 Double-click the Dreambox Control Center icon on your computer to launch the application. The application will automatically detect the receiver.
3 Click the 'Search' button the Computer icon. A dialog box will open with the IP addresses available for your network.
Select your IP address from the list then click 'OK.' If you don't know your computer's IP address see the Resources section for assistance. 4 Click the 'Search' button under the router icon, then select your IP address from the dialog box. Tips & Warnings This software is not made or sponsored by the manufacturers of the Dreambox DVB receiver.
. If this is your first visit, be sure to check out the,. Please ensure you fully read and understand them before you register on our Forum. Continued use of our site signifies your acceptance of these policies. If you do not accept the policies or do not understand them, then please do not use this site.
Download Dreambox Free
You must before you can post: click the register link to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Hrtunerproxy plugin (formally known as PlexAPI) created and maintained by OpenViX Team available via online plugin feeds. Use the tuners from your Linux Enigma 2 receiver in PlexDVR on a suitable Plex Server. For PlexAPI support please see the support section. Dear all Until yesterday I could use dreambox control center to have have access to my vu+solo2 image (and USB music store). However, when trying to connect DCC I get the following messages: Checking network.
Telnet Connected Connection failed! It looks as if I had changed the username or the password. I thought I would still have the default values. Strange enough WebIF works and I can make screenshots.
I have tried to restore the setting from 20 November, but it did not help. Any clue how I could get DCC FTP up and running again? Thanks for your hints nekrub2. Hi Andy Tough luck: On Fizilla the same Status: Connecting to 192.168.1.102:21. Status: Connection attempt failed with 'ECONNREFUSED - Connection refused by server'. Error: Could not connect to server Status: Waiting to retry. Status: Connecting to 192.168.1.102:21.
Status: Connection attempt failed with 'ECONNREFUSED - Connection refused by server'. Error: Could not connect to server It looks as if I had blocked my box from connecting to FTP. Do you know which settings I might have altered by error? In the worst case remains only system flash with USB without reloading of anny settings. Best regards nekrub2. Hi wollboy Nice try - but no cigar. Did as suggested by you but did not help.
Openif on port 80 (without request for login) works. However FTP does not. This is what I get from FileZilla when using instead of FTP:// IP FTPS:// Status: Waiting to retry. Status: Connecting to 192.168.1.102:21. Response: fzSftp started, protocolversion=8 Command: open 'root@192.168.1.102' 21 Error: Network error: Connection refused Error: Could not connect to server So there is a repose but the connection is refused. Hi Andy Tough luck: On Fizilla the same Status: Connecting to 192.168.1.102:21.
Status: Connection attempt failed with 'ECONNREFUSED - Connection refused by server'. Error: Could not connect to server Status: Waiting to retry.
Status: Connecting to 192.168.1.102:21. Status: Connection attempt failed with 'ECONNREFUSED - Connection refused by server'. Error: Could not connect to server It looks as if I had blocked my box from connecting to FTP.
Dreambox Control Centre Download For Mac Free
Do you know which settings I might have altered by error? In the worst case remains only system flash with USB without reloading of anny settings. Best regards nekrub2You get that message if FTP is not running on your box Menu - Setup - Network - Utilities - Utilities If the current status says stopped press geen to start it Also enable autostart in the same screen.